2 SAFETY
2 Safety
The Safety section contains important information for the safe operation and use of this product.
2.1
General Guidelines
WARNING
DO NOT use this product or any available optional equipment without first completely reading and understanding these instructions and
any additional instructional material such as owner's manuals, service manuals or instruction sheets supplied with this product or optional
equipment. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical
personnel before attempting to use this equipment - otherwise, injury or damage may occur.
ACCESSORIES WARNING
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by
other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.
!
NOTICE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Check all parts for shipping damage before using. In case of damage, DO NOT use the equipment. Contact the Dealer for further instructions.
2.1
Intended Use
The Invacare Matrx MX1 back is designed to provide precise orientation within the wheelchair for optimal postural support.
2.2
Installation Information
WARNING
The procedures in this manual should be performed by a qualified technician.
After any adjustments, repair or service and before use, make sure that all attaching component parts are secure.
DO NOT install the Invacare Matrx MX1 assembly onto back canes with an outside diameter greater than 1-inch (25 mm) or less than 3/
4-inch (19 mm). Otherwise, injury or damage may occur.
The mounting position of the Invacare Matrx MX1 is directly related to the chair's stability. Use extreme caution when using a new seating
position.
Ensure the Invacare Matrx MX1 is properly secured to the wheelchair before using. Otherwise injury or damage may occur.
Invacare® Matrx® MX1
6
Part No. 1176090