Disposal of the packaging
The packaging protects the appliance from transport damage. The
packaging material was chosen in consideration of the aspects of
environmental friendliness and disposal technology involved, and
thus is recyclable.
Recycling the packaging material for further use allows to save
raw materials and reduces the waste generation. When no longer
required, dispose of the packaging materials in accordance with
the local regulations in force.
NOTE
Keep the original packaging, if possible, during the warranty
►
period in order to be able to pack the appliance properly in
the event of a warranty claim. Transport damage will lead to
a void warranty.
Requirements for the place of use
For safe and trouble-free operation of the appliance, the
installation location has to satisfy the following requirements:
Place the appliance on a dry, flat, waterproof and heat-
■
resistant surface.
The surface finishes on furniture may contain constituents
■
that can be detrimental to the rubber feet of the appliance. If
necessary, place a mat under the feet of the appliance.
Do not place the appliance in a hot, wet or very humid
■
environment or in the vicinity of inflammable materials.
Because of hot surfaces, the appliance must be placed at a
■
location which is out of the reach of children.
The mains socket must be easily accessible to enable quick
■
disconnection of the appliance from the electric circuit in the
event of an emergency.
BEEM - Elements of Lifestyle
Initial use
EN
47