Changing The Activated Carbon Filter - Beem Fresh-Aroma-Perfect Deluxe Manual De Instrucciones

Changing the activated carbon filter

Change the activated carbon filter after brewing 70 times or when
the ☺ symbol starts flashing in the display. Please proceed as
follows:
Press the "Filter" button (29) to switch off the filter change
‹
reminder. The ☺ symbol on the display goes out.
Place the new filter in the filter container and close the filter
‹
container flap.
Slide the filter holder (15) into the recess (arrow).
‹
Press the "Filter" button (29) to activate the filter change
‹
reminder again.
NOTE
►
BEEM - Elements of Lifestyle
‹
‹
The filter change reminder is active only when
in the display is not flashing.
Cleaning and maintenance
Take the filter holder (15) from the
water tank (13) and open the filter
container flap and remove the used
activated carbon filter.
Remove the activated carbon filter
(16) from its plastic packaging and
thoroughly rinse under running water
in order to remove any potential
production residues.
EN
☺ symbol
65