About E-Iserv Audio Customize - Eclipse CD7100 Manual Del Propietário

About E-iSERV Audio Customize

The parametric equalizer, time alignment and crossover setting can be adjusted directly using the main
unit settings, or through the ECLIPSE website. The following sound quality adjustments can be performed
through the ECLIPSE website (E-iSERV):
• Automatic parametric equalizer
This can be used to automatically correct distortion in frequency characteristics (peaks and dips)
based on the results of measuring the frequency characteristics inside the vehicle.
• Time alignment and crossover adjustment
How to operate the Sound Adjustment Mode other adjustments besides adjustment of this main unit
can be carried out using the ECLIPSE web site.
• Custom mode
Using custom modes, E-iSERV Audio Customize allows you to make adjustments even more
precise than those available with the main unit alone.
Use the following procedure to make sound quality adjustments through the ECLIPSE website (E-
iSERV):
Speaker setting
• Crossover (See page 58)
• Time alignment (See page 58)
• Speaker layout (See page 61)
Frequency characteristics measurement Saving sound data
After measuring frequency characteristics, sound data (frequency
characteristics measurement result, crossover and time alignment
Adjustment value) will be written to USB memory automatically.
(Refer to "Measuring/display frequency characteristic" on page 56.)
E-iSERV (web site) accessing
Access the following URL: http://www.e-iserv.jp
Login
Sound quality adjusting
Follow the instructions given on the web site.
Correction data downloading
Follow the instructions given on the web site.
Correction data reading
(Refer to "Importing Sound Data (Sound Data)" on page 61.)
How to operate the Sound Adjustment Mode
XI
53