Displaying Measurement Results; Writing Measurement Results To The Usb Memory - Eclipse CD7100 Manual Del Propietário

Displaying measurement results

Press the button [6] for less than
2
one second in PEQ screen.
After pushing the button, a 10-second
countdown begins. Leave the vehicle
during that time.
Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
[Measuring] will appear on the display
while measurement is in progress.
When measurement is complete, the
measurement results will appear on
the display. You can adjust the volume
(by turning the [VOL] button) and
restart measurement
measurement is in progress.
Press the button [6] once more to
cancel measurement.
The measurement result can be
referred to when adjusting parametric
equalizer.
Press the [CUSTOM/MENU]
3
[RTN] button
adjustment mode.
Writing measurement results to the
USB memory
2
Connect the USB memory.
Press the button [6] for more than
3
one second.
After pushing the button, a 10-second
countdown begins. Leave the vehicle
during that time.
Pink noise will be output from the
speakers and measurement of the
frequency characteristics will start.
[Measuring] will appear on the display
while measurement is in progress.
When measurement is complete, the
measurement results will appear on
while
or
to exit sound
How to operate the Sound Adjustment Mode
the display. You can adjust the volume
(by turning the [VOL] button) and
restart measurement
measurement is in progress.
Measurements can be written to a
USB memory
automatically
website.
Press the button [6] once more to
cancel measurement.
Press the
4
[RTN] button
adjustment mode.
ATTENTION
When playing a music file in USB memory,
measurement results cannot be written to the
USB memory. Change into another mode and
carry it out again.
while
and corrected
using the E-iSERV
[CUSTOM/MENU]
to exit sound
or
XI
57