Switching The Sound Adjustment Mode; Circle Surround Ii (Csii) Setting; Parametric Equalizer Adjustment (Peq) - Eclipse CD7100 Manual Del Propietário

Various Settings
Switching the Sound
Adjustment Mode
Press the [CUSTOM/MENU] button
1
for more than one second.
The Menu Selection mode is activated.
Press the [SELECT] (Upper/Lower)
2
button to select the SOUND.
3
Press the [ENTER] button.
The sound
activated.
Press the [SELECT] (Upper/Lower)
4
button to select the setting item.
When the button is pressed, the
setting item changes.
The following setting items can be
switched based on the speaker layout
settings (see page 61):
When 4 speaker layout is selected:
CS II ↔ PEQ ↔ Time Alignment ↔
X-Over ↔ Harmonizer ↔ NF Setting ↔
Sound Data ↔ SP Layout ↔ Custom
Mode ↔ CSII
When 3 way speaker layout
selected:
PEQ ↔ Time Alignment ↔ X-Over ↔
Harmonizer ↔ NF Setting ↔ Sound
Data ↔ SP Layout ↔ Custom Mode ↔
PEQ ↔
5
Press the [ENTER] button.
Switches among
modes.
ATTENTION
If returning to previous screen, press the [RTN]
button.
54
adjustment mode
the adjustment

Circle Surround II (CSII) setting

CSII and TruBass (ON/OFF) settings can be
performed.
Press the [SELECT] (Upper/Lower)
1
button to select the CSII.
2
Press the [ENTER] button.
The CSII setting mode is activated.
Press the [SELECT] (Upper/Lower)
3
button.
is
Press the [SELECT] (Upper/ Lower)
button to set CSII modes as follows:
Low ↔ Hi ↔ OFF ↔ Low
Press the [SELECT] (Right/Left)
4
button.
When CSII is HI or Low, TruBass can
be turned ON/OFF.
Right: TruBass ON
Left: TruBass OFF
The TruBass display will appear
shaded when TruBass is set to OFF.
The selected settings will take effect.
Press the [CUSTOM/MENU] or
5
is
[RTN] button
adjustment mode.
Parametric equalizer
adjustment (PEQ)
When the 4-speaker layout is selected, 7-band
parametric equalizers can be adjusted.
When the 3 way speaker layout is selected, 11-
band parametric equalizers can be adjusted for
both the Hi range, Mid range and Low range.
(For details, about speaker layout setting, refer to
"Speaker layout settings (SP Layout)" on page
61.)
Each band can be set to the following median
frequencies:
to exit sound