Installing The Wall Bracket; Placing The Display Housing On The Wall Bracket - Seca 656 Manual Del Usario

Installing the wall
Placing the display
housing on the wall
72 •
Choose an adequately strong load-bearing wall to
mount the device. Standard wall plugs are supplied for
bracket
installation on solid brick walls. We recommend use of
appropriate special wall plugs for other types of wall.
1. Mark the drill holes at the desired height, making
sure they are level.
2. Drill the holes using a Ø 5 mm drill bit.
3. Insert the wall plugs in the drill holes.
4. Screw the wall bracket to the wall in the alignment
shown.
bracket
Rear view
(Schematic diagram)
Place the display housing on the wall bracket as
shown in the drawing above.
NOTE
When selecting mounting height, take account
of the length of the connecting cable.