Front Panel - Pioneer CDJ-850 Manual De Instrucciones

— When pressed once, the main unit display's time display mode
(remaining time display or elapsed time display) switches.
— When pressed for over 1 second, auto cue turns on and off.
i Main unit display (page 14)
j BROWSE (page 16)
Press this to display the [BROWSE] screen.
k TAG LIST (page 17)
Press this to display the [TAG LIST] screen.
l INFO (page 18)
Press this to display the [INFO] screen.
m MENU (UTILITY) (page 23)
— When pressed once, the menu screen is displayed.
— The [UTILITY] screen is displayed when this is pressed for over
1 second.
n BACK (page 17)
— Press this once to return to the previous screen.
— Press for over 1 second to move to the top layer.
o TAG TRACK/ REMOVE (page 17)
Use these to add and remove tracks from the tag list.
p Rotary selector (page 19)
— Turn the rotary selector to select tracks or folders.
— Press the rotary selector to enter.
q STANDBY indicator (page 24)
This lights when the auto standby function is activated.
r DISC EJECT h (page 16)
Use this to eject discs.
s CUE/LOOP CALLc/ d (page 21)
Use these to call out cue and loop points stored on the USB device.
t DELETE (page 21)
Use this to delete cue and loop points stored on the USB device.
u MEMORY (page 21)
Use this to store cue and loop points on the USB device.
v VINYL SPEED ADJUST TOUCH/RELEASE (page 22)
Use this to adjust the speed at which playback slows down and stops
when the top of the jog dial is pressed and the speed at which normal
playback resumes when the top of the jog dial is released.
w VINYL (JOG MODE) (page 22)
Use this to switch the jog dial mode.
x TEMPO ±6, ±10, ±16, WIDE (page 22)
Use this to switch the playing speed adjustment range.
y MASTER TEMPO (page 22)
Use this to turn the master tempo function on and off.
z TEMPO (page 22)
Use this to adjust the track playing speed.
A Jog dial (page 22)
This can be used for such operations as scratching, pitch bending,
etc.
B Jog dial display section (page 14)
Rear panel
C u (power switch)
This switches this unit's power between on and standby.
D AC IN (page 15)
Connect this to a power outlet.
Connect the power cord after all the connections between devices
have been completed.
Be sure to use the included power cord (page 2).
E Kensington security slot
F USB (page 15)
Connect to a computer.
G CONTROL (page 15)
Connect the control cord (included) here.
H AUDIO OUT L/ R (page 15)
Connect the audio cables (included) here.

Front panel

I Disc insertion slot
J Disc force eject pin insertion hole
13
En