Playback
e f
BROWSE
PC
USB
USB
STOP
DISC
1
1 / 16
TIME
AUTO
CUE
MODE
2
1 / 8
IN / CUE
OUT
RELOOP / EXIT
LOOP
4
1 / 4
IN ADJUST
OUT ADJUST
8
1 / 2
AUTO
BEAT LOOP
BEAT
SELECT
DIRECTION
5
REV
TRACK SEARCH
4
SEARCH
3
2
CUE
PLAY / PAUSE
REV
1
1
Load the source onto this unit.
2
Press either [USB] f or [DISC] e.
This selects the source.
! If tracks are loaded from another source, a warning message is
displayed. After checking the message, press the rotary selector to
turn the message off and switch the source.
3
Turn the rotary selector p.
Select the track.
! To move to a lower layer in the folder or category, select the folder
then press the rotary selector.
! To return to a higher layer, press [BACK].
! Press [BACK] for more than 1 second to move to the top layer.
4
Press the rotary selector p.
The track is loaded and playback begins.
! When a disc containing music files recorded with a hierarchical
structure is loaded, playback starts from the tracks in the upper-
most level.
Pausing
During playback, press [PLAY/PAUSEf] 1.
! Playback resumes when [PLAY/PAUSEf] is pressed again.
Resuming playback from the position playing
just before the disc was ejected (Resume)
After ejecting the disc, immediately reload that same disc
into this unit.
! The resume function only works when the same disc is ejected
then reloaded before loading another disc.
! The resume function does not work for USB devices.
Forward and reverse scanning
Press [SEARCH m, n] 3.
The disc is forwarded when [n] is pressed and held in.
The disc is reversed when [m] is pressed and held in.
n
p
UTILITY
BACK
TAG TRACK
/REMOVE
TAG LIST
INFO
MENU
STANDBY
DISC EJECT
VINYL
SPEED ADJUST
TOUCH /
RELEASE
CUE / LOOP
DELETE
MEMORY
CALL
JOG MODE
VINYL
TEMPO
6
10
16
MASTER
TEMPO
0
FWD
TEMPO
CDJ-850
MULTI PLAYER
Finding the beginnings of tracks (Track
Search)
Press [TRACK SEARCH o, p] 4.
Press the [p] to move to the beginning of the next track.
When [o] is pressed, playback returns to the beginning of the cur-
rently playing track. When pressed twice in a row, playback returns to
the beginning of the previous track.
! When auto cue is turned on, the set searches for the beginning of
the track and pauses there (page 20).
Playing in reverse
WIDE
Press [DIRECTION REV] 5.
The [DIRECTION REV] indicator lights and the track is played in the
reverse direction.
! When the music files are recorded in a folder structure, only tracks
within the same category/ folder can be played in reverse. Also note
that reverse playback may not start immediately.
! The direction in which the playing speed is increased or decreased
according to the direction in which the jog dial is turned is
reversed.
! When such operations as track searching and loop playback are
performed during reverse playback, the audio memory status dis-
play on the jog dial display section flashes and scratch play may
not be possible.
Setting Cue
PC
USB
USB
STOP
DISC
1
1 / 16
TIME
MODE
2
1 / 8
IN / CUE
4
1 / 4
IN ADJUST
8
1 / 2
AUTO
BEAT LOOP
8
BEAT
SELECT
7
6
DIRECTION
5
REV
TRACK SEARCH
4
SEARCH
3
2
CUE
PLAY / PAUSE
1
1
During playback, press [PLAY/PAUSEf] 1.
Playback is paused.
2
Press [CUE] 2.
The point at which the track is paused is set as the cue point.
The [PLAY/PAUSEf] indicator flashes and the [CUE] indicator
lights. No sound is output at this time.
! When a new cue point is set, the previously set cue point is
canceled.
h
m
UTILITY
BACK
BROWSE
TAG LIST
INFO
MENU
AUTO
CUE
OUT
RELOOP / EXIT
CUE / LOOP
DELETE
LOOP
CALL
OUT ADJUST
REV
p
TAG TRACK
/REMOVE
STANDBY
DISC EJECT
s
VINYL
SPEED ADJUST
TOUCH /
RELEASE
MEMORY
JOG MODE
VINYL
TEMPO
6
10
16
WIDE
MASTER
TEMPO
0
FWD
TEMPO
CDJ-850
MULTI PLAYER
19
En