Feature 1 Or 2 Setup - Pentair IntelliFlo WhisperFlo VF Guide D’installation

38
Features Menu (Continued)

Feature 1 or 2 Setup

To access the Features 1(2) menu:
1. Ensure that the green power LED is on and the pump is stopped.
2. Press the Menu button. "Pool Data" is displayed.
3. Use the Up and Down arrow buttons to scroll to the "Features" menu item. Press the Select button
to select it. "Feature 1" is displayed. Use the Up and Down arrow buttons to scroll
to the Feature 1 or Feature 2 menu item. Press the Select button to select one.
a)
To set the flow rate for Feature 1 or 2:
the Feature 1 (2) "Set Flow" setting (Default 12m
see step 4, below.
b)
To set the duration for Feature 1 or 2: U
buttons to scroll to the "Time Duration" setting. Press the Select button to
access it (Default 00:01). To change the setting, see step 4, below.
4. To change a setting, press the Left and Right arrows to select which digit to
modify, then use the Up and Down arrows to change the selected digit.
5. When you are done, press the Enter button to shave the changes. To cancel any
changes, press the Escape button to exit mode without saving.
IntelliFlo VF Installation and User's Guide
®
FEATURES 12:15 Feature 1
Feature 1
Set Flow
Press the Select button to access
/h). To change the setting,
3
se the Up and Down arrow
Feature 1 displays
®
12:15
12m³/h
Features
Set Flow
®
MENU 12:15