General Information - WIKA CPH62I0-S1 Manual De Instrucciones

1. General information

1. General information
The hand-held pressure indicator described in the operating instructions has been
■
GB
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the hand-
■
held pressure indicator. Working safely requires that all safety instructions and work
instructions are observed.
Observe the relevant local accident prevention regulations and general safety regula-
■
tions for the hand-held pressure indicator's range of use.
The operating instructions are part of the instrument and must be kept in the immedi-
■
ate vicinity of the hand-held pressure indicator and readily accessible to skilled
personnel at any time.
Skilled personnel must have carefully read and understood the operating instruc-
■
tions, prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused by using the
■
product contrary to its intended use, non-compliance with these operating instruc-
tions, assignment of insufficiently qualified skilled personnel or unauthorised modifi-
cations to the hand-held pressure indicator.
The general terms and conditions, contained in the sales documentation, shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DKD/DAkkS calibrations are carried out in accordance with
■
international standards.
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
4
www.wika.de / www.wika.com
CT 11.02
Tel.: (+49) 9372/132-9986
Fax: (+49) 9372/132-8767
E-Mail: testequip@wika.de
WIKA operating instructions, model CPH62I0