General Information; Design And Function - WIKA TC52-M Manual De Instrucciones

1. General information / 2. Design and function

1. General information

The high-temperature magnetic surface thermocouple described in the operating
■
instructions has been manufactured using state-of-the-art technology. All components
EN
are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the instrument.
■
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions onto the next operator or owner of the instrument.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant: Tel.: +49 9372 132-0

2. Design and function

2.1 Description
The magnetic thermocouple assembly is designed as a non-welded option for vessel wall
temperature measurement. The circular magnet design incorporates an insulation barrier
from radiant heat along with a sensor tip designed to maximise surface contact to ensure
accurate temperature measurement.
The neck tube can be manufactured to length based on insulation thickness. The spring-
loaded neck tube ensures sensor contact with the vessel wall and allows for maintenance
without the use of tools above the insulation/cladding of the vessel.
This document describes instruments in standard version. For applications in hazardous
areas special instrument versions are required.
4
www.wika.de / www.wika.com
TE 66.52
Fax: +49 9372 132-406
info@wika.de
WIKA operating instructions model TC52-M