Technical Specifications - HQ-Power VDL502CB Manual Del Usuario

6. Maintenance
•
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting
supports, do not change the location of the connections...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
•
Disconnect the device from the mains prior to maintenance activities.
•
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
•
There are no user-serviceable parts, apart from the lamp and the fuse.
•
Contact your dealer for spare parts if necessary.
7.

Technical Specifications

power supply
power consumption
fuse
lamp
dimensions
weight
max. ambient temperature
max. housing temperature
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulted from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our
website www.hqpower.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual or may be copied, reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 02 – 18/04/2012
VDL502CB
230 VAC ~ 50 Hz
max. 100 W
2 A, 250 VAC (5 x 20 mm) (order code FF2N)
2x 50 W / 12 V JDC G6.35 (order code LAMP50MF)
Ø 230 x 300 mm
2.8 kg
T 45°C
a
T 130°C
b
4 ©Velleman nv