Technical Specifications - HQ-Power VDL10MB2 Manual Del Usuario

• The installation must always be secured with a secondary attachment, e.g. a safety cable
or safety net.
• Install the device in a location with few passers-by that is inaccessible to unauthorised
persons.
• Overhead mounting requires extensive experience: calculating workload limits, determining
the installation material to be used... Do not attempt to install the device yourself if you lack
these qualifications as improper installation may result in injuries. Never stand directly below
the device when it is being mounted, removed or serviced. Have a qualified technician check
the device once a year and once before you bring it into service.
• Have a qualified electrician carry out the electric connection.
• The installation has to be approved by an expert before the device is taken into service.
• The mirror ball (3) has to be properly attached to the mirror ball motor (1).
• Use mains powered mirror ball motor (1) HQMB15001 or an equivalent in combination
with a safety cable (5). Make sure the safety cable is securely attached to the safety rings
(4 & 6) and is slightly longer than the mirror ball chain (2).
• The safety cable should be installed in such a way that no part of the installation can fall
down if the main attachment fails and that it can hold at least 12 times the weight of the
installation for 1 hour without any harming deformation.
• Make sure the mirror ball is never slowed down or stopped by decoration material etc.
Make sure no side forces can impact on the installation.
5.

Technical Specifications

diameter
approximate weight
appropriate motor
Use this device with original accessories only. Velleman nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of this
device. For more info concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in this manual is subject
to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved.
No part of this manual may be copied, reproduced, translated or reduced to any electronic
medium or otherwise without the prior written consent of the copyright holder.
V. 04 – 19/10/2020
VDL10MB2/VDL20MB2/VDL30MB2/VDL50MB2
VDL10MB2 VDL20MB2
10 cm (4") 20 cm (8")
0.19 kg
VDL30MB2
30 cm (12")
0.75 kg 1.4 kg
HQMB15001
4
VDL50MB
50 cm (19 10/16 ")
4.9 kg
©Velleman nv