Removing The chiller shelf;
• Open the cover fully. (Picture-1)
• Pull the chiller shelf out toward you. (Picture-2)
• Pull the wheels of chiller shelf up from rail to remove. (Picture-3)
Fresh dial
Temperature indicator
In case of the crisper is totally full, the fresh dial is
located in front of crisper, should be opened. By
means of this the air in the crisper and humidity
rate will be controlled and endurance life will be
increased.
If you see any condensation on glass shelf, you
must open this klape which is on behind of shelf.
This appliance is sold in France. In accordance with
regulations valid in this country it must be provided with
a special device (see figure) placed in the lower
compartment of the fridge to indicate the coldest zone
of it.
ENGLISH
21