Maintenance; Installing Or Removing The Lid/Strainer Basket - Speck BADU Eco Motion Manual De Uso

Pos: 134 /Technische Dokumentation/Betriebsanleitung/Wartung/Instandhaltung/allgemeine Anleitung/Wartung/Instandhaltung @ 1\mod_1428480782431_370.docx @ 27443 @ 1 @ 1
8

Maintenance

NOTICE
 Before maintenance work, close all shut-off valves and drain
all pipes.
All pumps
When?
Regularly
If there is a chance of
frost
Additionally for pumps with plastic lanterns (AK version)
When?
Regularly
Prior to longer idle
periods
 After completing all maintenance work, perform all necessary
measures for start-up. See point 6.1 on page 21.
 Service addresses can be found on our website
www.speck-pumps.com.
Pos: 135 /Technische Dokumentation/Betriebsanleitung/Wartung/Instandhaltung/allgemeine Anleitung/Deckel/Saugsieb demontieren beziehungsweise montieren @ 1\mod_1428483024842_370.docx @ 27458 @ 2 @ 1
8.1

Installing or removing the lid/strainer basket

Any lids and strainer baskets must be removed for work to be
performed. See 8.1 in the associated pump data sheet.
Pos: 136 /Technische Dokumentation/Allgemeine Module/#### Seitenumbruch #### @ 0\mod_1426069111812_0.docx @ 891 @ @ 1
04|2017
What?
 Clean strainer basket.
 Drain pump and pipes sensitive
to frost in good time.
What?
 Remove salt crystals caused by
the salt water. See point 8.3 on
page 27.
 Rinse the pump with tap water
to prevent crystals from forming
on the mechanical seal.
Maintenance
EN 25