Maintenance; Cleaning The Machine; Replacing The Stitch Plate - Singer C240 Manual De Instrucciones

Maintenance

Cleaning the Machine

To keep your sewing machine operating well, clean it
Wipe the exterior surface of your machine with a soft
cloth to remove any dust or lint built up.
Cleaning the Bobbin Area
Note: Raise the needle, lower the feed teeth and
turn off the machine.
Remove the presser foot. Push the Bobbin Cover
plate.
Clean the feed teeth and the bobbin area with the brush
found with the accessories.
Cleaning Under the Bobbin Area
Clean the area under the bobbin case after sewing
several projects or any time you notice an accumulation
of lint in the bobbin case area.
Remove the bobbin case by lifting it up and to the right.
Clean the area with the brush or with a dry cloth.
Put the bobbin case back into the hook race so that the
Note: Do not blow air into the bobbin case area. The
dust and lint will be blown into your machine.

Replacing the Stitch Plate

With the feed teeth lowered, replace the stitch plate and
insert and tighten the two stitch plate screws. Replace
the bobbin cover.
C
C
A
B
D
25