Bobbin Winding - Singer C240 Manual De Instrucciones

The auxiliary spool pin is used when winding a bobbin
thread from a second spool of thread or for a second
Insert the auxiliary spool pin onto the end of the bobbin
thread spool onto the auxiliary spool pin.

Bobbin Winding

1. Place the thread spool on the spool pin in horizontal
to back. Pull the thread counter-clockwise around
inside to the outside.
4. Place an empty bobbin on the bobbin winding
spindle.
5. Push the bobbin winding spindle to the right to
wind.
Press the foot control to wind the bobbin.
When the bobbin is full, release the foot control.
Push the bobbin winding spindle to the left. Remove
the bobbin and cut the thread.
A
B
B
C
A
Auxiliary spool pin.
C
D
11