Tabla De Contenido; Symbols; General Safety Instructions - Festool SHINEX RAP 150 FE Manual De Instrucciones

Contents
Symbols................................................ 6
Safety instructions ............................... 6
Technical data ...................................... 9
Functional description ......................... 9
Intended use ........................................ 9
Operation ............................................. 10
Electronics ........................................... 10
Settings ................................................ 11
Working with the machine ................... 11
Service and maintenance .................... 12
Accessories.......................................... 12
Disposal ............................................... 13
Warranty............................................... 13

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1 WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
6
V
A
Hz
~
n
0
rpm
-1
min
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear protective goggles.
Wear ear protection.
Safety instructions
2 ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of

Symbols

volts
amperes
hertz
alternating current
no load speed
Class II Construction
revolutions per minute
diameter
tip, hint