Assembly - BABYTREND TJ50B Manual De Instrucciones

ASSEMBLY

3) • Slide the retainer plate onto the front
wheel. Be sure that the raised lip is
pointing toward the fork and insert it
into the slot on the fork. The tab on the
retainer plate must be lined up with the
slot before tightening the wheel (Fig. 3).
4)
• With the wheel in position, tighten the
axel nuts and tighten with standard
crescent, box, or open end wrench. You
should feel significant resistance and
the wheel should be held tightly in place
(Fig. 4).
REAR WHEElS
5) • Lean the stroller forward to rest on the
front wheel.
• Press the rear wheel posts into the rear
frame hub until it clicks into place (Fig. 5).
NOTE: Pull on the rear wheel to ensure
that it is securely attached to the stroller.
TIRES
6) • Tires are shipped un-inflated. The tires
should be inflated on a regular basis to
between 20 to 25 p.s.i. Always use a
bicycle style hand air pump to inflate the
tires (Fig. 6). *not included.
5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Front Fork
Slot
Axel and Hub
Retainer Plate
Axel Nut
Fig. 3
Fig. 4
Fig. 5
Fig. 6
MUlTI-POSITION HANDlE
7) • To adjust the handle, press the release
buttons to move the handle up or down to
a comfortable position for the user (Fig. 7).
NOTE: Make sure the handle clicks into
place before using.
BUMPER BAR
WARNING:
Do not
use bumper bar to carry
seat with child inside. The
bumper bar is not a carrying
handle.
8) • Attach the bumper bar by lining up
anchors with the slots on the seat. Push
until it clicks into place (Fig. 8a).
NOTE: The bumper bar must be securely
attached before using this product.
• To detach bumper bar, press the release
button on the bottom of the bar and pull
bar out of the anchor. Swing the bar
upwards to access the seat (Fig. 8b).
STORAGE BASKET
9) • Use the zipper to open and close the
storage cover to access the storage basket
(Fig. 9).
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Release Button
Fig. 7
Fig. 8a
Fig. 8b
Storage Basket
Lift Cover
Open Zipper
Fig. 9
6