Technical Specifications - Mettler Toledo PE200 Instrucciones De Manejo

TECHNICAL SPECIFICATIONS

Weighing range
Readability
Tare range (by subtraction)
Admissible ambient temperature (during operation)
Sensitivity drift (10...30 °C)
Result deviation (with balance inclined 1 : 1000)
Reproducibility
Linearity
Stabilization time (typical)
Integration time
Display sequence: DeltaDisplay off
DeltaDisplay on
Stability control (sensitivity invariable)
Power supply:
– Adjustable voltage settings
– Admissible voltage fluctuations
– Frequency
– Power consumption
Dimensions of housing (W x D x H)
Weight
Weighing pan (chrom-nickel steel)
METTLER TOLEDO 05 Data Output Combined current loop and voltage interface.
Galvanically separated, unidirectional 2-wire interface. Characters: alphanumeric. Character code: ASCII/ISO, 7-bit, even parity.
Transfer speed: 2400 baud. Connector socket: 7-pole, type Hirschmann Mab 7S.
03 Mode (for METTLER TOLEDO peripheral instruments) Loop current: 20 mA (passive)
CL Mode (for METTLER TOLEDO CL instruments as well as for non-METTLER TOLEDO instrument with active loop current input)
RS232 Mode (for non-METTLER TOLEDO instruments) Voltage interface according to RS232C/V24
18
PE200 PE400
210 g 410 g
0.01 g 0.01 g
210 g
10...+ 40 °C 10...+ 40 °C
-5
+ 2·10 /°C + 1.2·10
+ 0.02 g + 0.02 g
0.005 g 0.005 g
+ 0.015 g + 0.015 g
1.25 s / 2.5 s*
0.6 s / 1.2 s*
0.15 s / 0.3 s*
ON / OFF
95V, 105V / 110V, 120V / 190V, 210V / 220V, 240V
+ 10 %
50...60 Hz
about 10 VA
194 x 310 x 65 mm
3.7 kg
dia. 130 mm
PE2000
2100 g
0.1 g
410 g
10...+ 40 °C
-5 -5
/°C + 2·10 /°C
+ 0.2 g
0.05 g
+ 0.15 g
2 s
* When integration time is doubled
3.8 kg
dia. 170 mm
PE4000
4100 g
0.1 g
2100 g 4100 g
10...+ 40 °C
-5
+ 1.2·10 /°C
+ 0.2 g
0.05 g
+ 0.15 g