Specifications And Operator Interface; Specifications - Mettler Toledo IND780 Guía Rápida

2. Specifications and Operator Interface

Specifications

Enclosure Types
Dimensions (l × w × d)
Shipping Weight
Environmental Protection
Operating Environment
Hazardous Areas
AC Input Power
Scale Types & Update
Rates
Analog Load Cell
Interface and Function
Update Rates (max)
Keypad
Communication
Approvals
4 METTLER TOLEDO IND780 Quick Guide
Panel-mount: Stainless steel front panel. Intended for installation in an enclosure
Harsh environment desk/wall/column-mount: Type 304L stainless steel enclosure
Panel-mount: 320 mm × 220 mm ×110 mm / Harsh environment: 299 mm × 200 mm × 141 mm
5 kg (11 lb)
Panel-mount front panel sealing provides Type 4x and Type 12 protection – equivalent to IP65 when mounted on a
flat surface
Harsh environment meets IP69K requirements
All terminal types can be operated at temperatures ranging from −10° to 40° C (14° to 104° F) at 10% to 95%
relative humidity non-condensing
Not all versions of the IND780 can be operated in areas classified as Hazardous by the National Electrical Code
(NEC); check terminal data label – hazardous area model numbers terminate in –Z97. Contact an authorized
METTLER TOLEDO representative for information about hazardous applications.
Operates at 100–240 VAC, 49–61 Hz, 400 mA
Panel-mount version provides a terminal strip for AC power connections.
Harsh environment version includes a power cord configured for the country of use.
Analog load cells (update >366 Hz)
IDNet, High-Precision K Line, POWERCELL
by base)
Excitation voltage: 10 VDC. Minimum sensitivity: 0.1 microvolts
Internal discrete I/O: up to 50 Hz depending on terminal configuration / External discrete I/O (ARM100): 25 Hz
PLC cyclic data: 25 Hz / SICS Continuous: 20 Hz / MT Continuous Output: 20 Hz
30 keys; 1.22-mm thick polyester overlay (PET) with polycarbonate display lens
Standard Interfaces
Two serial ports COM1 (RS-232) and COM2 (RS-232/RS-422/RS-485), 300 to 115,200 baud; Ethernet 10/100
Base-T
Serial Inputs
ASCII characters, ASCII commands for CTPZ (Clear, Tare, Print, Zero), SICS (most level 0 and level 1 commands)
Serial Outputs
Continuous or Demand with up to ten configurable print templates or SICS host protocol, report printing, interfaces
with external ARM100 Input/Output modules, and DeviceNet Bridge
PLC Interfaces
A single interface supported: Analog output, Allen-Bradley™ RIO, ControlNet™, DeviceNet™, EtherNet/IP, Modbus
® ®
TCP, Profibus DP, Profinet
Weights and Measures
USA: NTEP CoC # 06-017
Class II, 100,000d (0-40° C for Class II operation)
Class III, IIIL, 10,000d
Canada: AM-5592
Class II 100,000d (0-40° C for Class II operation)
Class III 10,000d and Class IIIHD 20,000d
Europe: TC6944
Class II, approved divisions determined by platform
Class III, IIII, 10,000e
Product Safety
UL, cUL, CE
® ® ®
MTX , POWERCELL PDX , PowerMount, SICS (update rates determined
Hazardous Areas (if terminal so marked)
IECEx UL 10.0014X
Ex icnA[ic] IIB T4 G
Ex T III CT85° C D
c
US/Canada UL
20141113-E152336
Using control drawing 64069877
Class I Div 2 GP A-D (with PDX: GP C,D)
Class II Div. 2 GP F, G
Class III
ATEX DEMKO 07ATEX0520819X
II3G Ex ic nA[ic] IIB T4 G
II3 D Ex tc IIIC T85°C D
}
c
-10° C ≤T ≤ 40° C
amb
c
c
c
30284499 | 00 | 02/2016