SATA SATAminijet 4 HVLP Instrucciones De Servicio página 75

Operating instructions SATAminijet 4 HVLP
Preface
Prior to putting the unit/paint spray gun into operation, read the operating instructions
completely and thoroughly. The stipulations contained therein are to be respected in any case.
After that, the operating instructions are to be stored in a safe place, accessible for every
user of the equipment. The unit/paint spray gun may only be put into operation by persons
familiar with its use (professionals). Inappropriate use of the unit/paint spray gun, modification
of any kind or combination with inappropriate other parts may cause material damage, serious
hazard to the user's, other person's or animal's health or even death. SATA shall not take any
responsibility for such damages (e.g. failure to respect the stipulations laid out in the operating
instructions). The applicable safety, workplace and worker health protection regulations of
the respective country or area/district in which the system/the paint spray gun is used are to
be respected in any case (e.g. the German Rules for the Prevention of Accidents BGR 500
(BGV D25) and BGV D24 issued by the Central Office of the Professional Trade Associations,
etc.)
To be noted
Never point paint spray guns at yourself, at other persons or animals. Solvents and thinners
can cause burns. Only the respective quantities of solvents and paints required for work pro-
gress may be present in the direct surroundings of the unit (after work, solvents and paints
are to be returned to their assigned storage rooms). Prior to any repair work the unit must be
disconnected from the air supply.
Prior to putting the unit into operation, especially after each cleaning and each repair
work, check all screws and nuts for tight fit, as well as the sealing performance of the
spray guns and hoses.
Defective components must be replaced or repaired accordingly. To obtain best possible
coating results, and for maximum safety, only use original spare parts.
No sources of ignition (e.g. open flames, burning cigarettes, lamps without ex-protection
etc.) may be present during painting, as easily flammable mixture are generated during the
painting process. Occupational safety regulations must be applied when painting (respiratory
protection, etc.). Appropriate ear protection muffs are required, as a sound level of 90 dB(A) is
exceeded when coating with higher pressure levels. No vibration is transmitted to the upper
parts of the operator's body during use of the paint spray gun. Recoil forces are negligible.
The use of this product in explosion hazard areas Zone 0 is prohibited.
SATA, SATAminijet, the SATA Logo and/or other SATA products referenced herein are either
registered trademarks or trademarks of SATA Farbspritztechnik GmbH & Co. KG in the U.S.
and/or other countries. The names of companies and products mentioned herein may be the
trademarks of their respective owners.
1. Features and technical Data
• Paint spray gun with nozzle 0,8 HVLP 4
• 125 ccm plastic cup
• Universal spanner
• Max. air pressure:
• Max. material temperature:
• Air consumption at 29 psi:
29 psi
80 °C
approx. 4,1 cfm
IX.1