Main Features - Corghi CompactLine Serie Manual De Uso

- Low balancing speed:
• minimises wheel spin times;
• reduces risk due to rotating parts;
• saves energy.
- Automatic sensor for distance and diameter measurement.
- LaserBlade pointer ie laser line inside the automatic detection arm to indicate the
position of the balancing plane acquisition (available on request).
- Automatic mechanical sensor for width measurement (if present).
- "AWC" (Auto Width Calculation) programme for enabling the manual insertion of the
width (if present).
- Automatic brake for stopping the wheel at the end of the spin.
- STOP button to stop the machine immediately.
- Side flange holders.
- Top tray to take weights of all types.
- High-resolution LCD monitor, indispensable aid for executing new programmes.
- User-friendly graphics for fast and effective learning of the machine functions.
- Keypad with a reduced number of keys for data entry and programme selection.
- On-screen interactive help.
- Multi-language texts.
- Microprocessor processing unit (32 bit).
- Resolution: 1g (1/10oz).
- Wide selection of programmes making the machine easy to use.
- Unbalance value display in grams or ounces.
- Unbalance display rounding-off setting.
- Balancing modes available:
• Standard
• Alu / Alu P
• Motorcycle Dynamic
• Motorcycle ALU
• Static
- "Shift planes" programme (in Alu P) for using multiple five gram weights, i.e.: available
without the need for partial cuts.
- "Hidden Weight" programme (in Alu P) in order to divide the outer side balancing
adhesive weights into two equal weights positioned behind the spokes of the rim.
- "Split Weight" programme (motorcycle programmes) to divide the weight into two
equivalent values to be placed on either side of the spoke.
- "OPT flash" programme for rapid optimisation of operating noise reduction.
- "FSP" (Fast Selection Program) programme for automatic selection of the balancing
programme.
- General utility programmes:
• independent calibration of the machine's components;
• main screen customisation;
• spin overall and partial number counter;
• selection of the 2 most used programmes;
• visualisation of the service and diagnostics page.
- Independent working environments that allow a maximum of three operators to work
Operator's manual EM 9280 - EM 9280 C CompactLine

MAIN FEATURES

dynamic on both rim sides
seven different routines for alloy rims
dynamic on both sides of motorcycle rims
dynamic on both sides of alloy motorcycle rims
on a single side.
UK
77