Getting Started; Turning On; Aps Mode - Pioneer XW-BTS7-T Instrucciones De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 42

Turning on

Press
[STANDBY/ON] button. The indicator would light.
This unit switches to the last select mode.

APS mode

• After this unit is kept inactive for 20 minutes, it automatically switches to the standby mode.
• When 5 minutes before switching to the standby mode automatically, the indicator starts to blink.
How to turn off the APS mode
• Press and hold
[Mute] button to turn off the APS mode in the standby mode and the
indicator flash with red for about 3 seconds.
• If the APS mode is turned on again, Press and hold
the indicator lights red for about 3 seconds.
Note
• When you play at low volume, this unit might switch to the standby mode automatically. Please
increase the volume, or turn off the APS mode.

Getting Started

[Mute] button in the standby mode and
10

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xw-bts7-q

Tabla de contenido