Additional Information; Troubleshooting - Pioneer XW-BTS7-T Instrucciones De Funcionamiento

Troubleshooting

WARNING
• Never remove the casing of this apparatus.
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie in
another component. Inspect the other components and electrical appliances being used. If the
trouble cannot be rectified even after checking the points below, ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
• If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert it again to return to normal operating conditions.
Problem
The power does not turn on
Power automatically switches to
standby without user action.
No sound is output when a
mode is selected.
Can't operate the remote control.
Can't operate the iPod/iPhone.

Additional Information

Remedy
• Disconnect the power plug from the outlet, and
insert again.
• When no device is connected to the selected the
dock or the AUX IN jack and this unit is not
operated for 20 minutes or more after the
respective mode is selected, power will
automatically turn Off. (Only when APS mode is
on)
• Make sure the component is connected correctly.
• Replace the battery.
• Operate within 5 m, 30° of the remote sensor on
the front panel.
• Remove the obstacle or operate from another
position.
• Avoid exposing the remote sensor on the front to
direct light
• Make sure the iPod/iPhone is connected
correctly.
• If the iPod/iPhone is experiencing a
hangup, try resetting the iPod/iPhone, and
reconnect it to the unit.
18