Replacing The Ski Soles; Disposal; Legal Information; Liability - Ottobock ProCarve Instrucciones De Uso

8.1 Replacing the ski soles

> Required tools and materials:
Phillips screwdriver, 501B6=4.2x13 Oval-Head Screws
1) Unscrew the 4 screws in the ski sole that is to be replaced (see fig. 15).
2) Replace the ski sole and screw it in (see fig. 16).

9 Disposal

Dispose of the product in accordance with national regulations.

10 Legal information

All legal conditions are subject to the respective national laws of the country of use and may vary accordingly.

10.1 Liability

The manufacturer will only assume liability if the product is used in accordance with the descriptions and instruc­
tions provided in this document. The manufacturer will not assume liability for damage caused by disregarding the
information in this document, particularly due to improper use or unauthorised modification of the product.

10.2 CE conformity

The product meets the requirements of Regulation (EU) 2017/745 o n medical devices. The CE declaration of con­
formity can be downloaded from the manufacturer's website.

11 Technical data

Reference number
Weight [g]
System height [mm]
System height, distal [mm]
System height, proximal [mm]
Proximal connection
Distal connection
Max. flexion angle (unlocked) [°]
Max. body weight [kg]
Reference number
Weight [g]
System height
- with attachments for ski binding [mm]
- with foot shell [mm]
Proximal connection
Max. range of motion [°]
Max. body weight [kg]
ProCarve
Prosthetic knee joint
Prosthetic foot
3R2
1990
241
207
34
Pyramid adapter
Pyramid adapter
80
100
1E2 1E2=1
1550
120
103
Pyramid adapter
25
100
Disposal
25