Use Touch Tones - Nokia 3585 Manual Del Usuario

4 Scroll to one of the following options and press Select:
Option
Rename group
Group ringing tone
Group logo
Group members

• USE TOUCH TONES

Warning!
confidential information. Check your phone's display for the
the presence of a digital network.
Touch tones (sometimes known as DTMF tones) are those tones produced when you press the
keys on your phone's keypad. You can use touch tones for many automated dial-up services such
as banking and airlines, or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from your phone's
keypad, or send them automatically by saving them in your phone.
Set manual touch tone options
You may need to customize how your phone sends the touch tones for optimum performance
with the system you're calling.
SET TOUCH TONE TYPE
1 Press Menu 4-2-2-1 (Settings > Phone settings > Touch tones > Manual touch tones).
2 Select one of the following options, then press Select:
Option
Continuous
Fixed
Off
SET FIXED TOUCH TONE LENGTH
You can also specify touch tone length when using the Fixed option.
1 Press Menu 4-2-2-2 (Settings > Phone settings > Touch tones > Touch tone length).
2 Scroll to Short (0.1 seconds) or Long (0.5 seconds), then press Select.
Description
Used to rename the selected caller group
Used to select a ringing tone for this group. Scroll through list of
ringing tones, then press OK
Used to view, activate or deactivate group logo
Used to assign other phone book entries to the selected caller group
If you send touch tones while in analog mode, be careful not to send
Description
Tone sounds for as long as you press and hold a key
Used to send tones of the duration you specify in the Touch tone
length option.
Used to turn off tones. No tones are sent when you press a key.
[ 50 ]
icon, indicating