Cleaning And Caring For The Device - Dometic DSP1212C Instrucciones De Montaje Y D’uso

SinePower
Switching the inverter function on/off
If an external AC power grid is connected, you can protect the battery by switching
off the device's inverter function. Thereby the consumers are supplied exclusively by
the external grid.
➤ Press
to switch off the inverter function.
➤ Press
again to switch on the inverter function.
Switching on the display
The display switches off after a defined time.
➤ Press the selector button or
Changing maximum allowed current of AC power supply
When the device works in inverter/charger operation the maximum allowed power
supply current can be set.
When the device is connected to the AC power supply, the previous power sharing
level value is flashing in the DSP-EM's display.
➤ Turn the selector button to scroll to the Fuse menu.
✓ The current value for the maximum power supply current is displayed.
➤ Press the selector button.
✓ The current value flashes.
➤ Turn the selector button to change the value.
➤ Press the selector button to save the value.
If no input is made for 2 min the previous value is used.
✓ The display shows the new value.
12

Cleaning and caring for the device

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
EN
Cleaning and caring for the device
or , to illuminate the display.
25