Extra Weight; Wheels - Stihl MM 55 Manual De Instrucciones

Extra Weight

An extra weight (special accessory) may
be retrofitted on the MultiEngine to
increase the weight on the MultiTool.
Only an original STIHL extra weight may
be used. Other weights may cause
damage to the unit and physical injury.
Mounting the extra weight
2
1
Unscrew weights on the side without
square end – as follows:
: Unscrew and remove the outer
weight.
: Unscrew inner weight and remove
from the bolt.
: Slide the extra weight (1) with bolt
through the bore (2) in the flange,
turning it until the square engages
the recess in the flange.
: Screw weight onto the bolt and
tighten it down firmly.
: Fit and tighten down the outer
weight firmly.
MM 55, MM 55 C
Use the combination wrench to unscrew
and retighten the weights.
One or two weights can be mounted
on each side of the extra weight as
required. Extra weight: 4 kg (8.8 lb)
and 2 kg (4.4 lb).
The maximum allowable extra
weight is 4 kg (8.8 lb). Never use a
heavier extra weight, as this may
damage the unit.
English / USA

Wheels

The MultiEngine can be equipped with a
set of wheels (special accessory) for
greater mobility. Use only original STIHL
wheels since the use of other wheels
may result in damage to the machine
and personal injury.
Mounting the wheels
2
5
4
3 1 3
1
7
6
7
Turn the power tool on its back so
that it rests on the handles.
17