Stihl MM 55 Manual De Instrucciones página 8

!
Warning!
To reduce risk of injury from MultiTool
rotating in the wrong direction, check
that the position of the gearbox is correct
and change it if necessary.
On metal tools (top illustration), position
the gearbox so that the shaft is below
the drive tube.
On sweeping tools (bottom illustration),
position the gearbox so that the shaft is
above the drive tube.
MM 55, MM 55 C
2
1
Shaft (1) below the drive tube.
Use position 1 for:
- BF-MM pick tines
- BK-MM bolo tines
- FC-MM edger
- RL-MM aerator
- MF-MM dethatcher
Shaft (2) above the drive tube
Use position 2 for:
- KB-MM bristle brush
- KW-MM STIHL PowerSweep
Check the owner´s manual for the
MultiTool to ensure you are using the
appropriate deflector for that MultiTool.
Starting
!
Warning!
Your power tool is a one-person
machine. To reduce the risk of injury,
keep bystanders out of your working
area (see MultiTool manuals for specific
distances).
Stop the engine and cutting tool
immediately if you are approached. Start
and operate your power tool without
assistance. For specific starting
instructions, see the appropriate section
of your manuals.
Place the unit on firm ground in an open
area. The attachments must be clear of
the ground and all other obstructions.
!
Warning!
TM
When starting, make sure you have a
firm footing - as shown; always stand to
one side of the machine to avoid risk of
injury from contact with rotating tool.
English / USA
7