Starting / Stopping The Engine - Stihl MM 55 Manual De Instrucciones

English / USA
Starting / Stopping
the Engine
6 5
4
3
7
2
Controls
: Throttle trigger interlock (1), throttle
trigger (2) and slide control (3) with
positions:
: START (4),
: # – normal run position (5) and
: O – STOP (6); to stop engine:
push slide control in direction of
arrow to stop symbol ( h ) (7).
14
Starting
: Move bike handle into working
position
: Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
: While holding both levers in this
position, move slide control to
START and hold it there.
: Now release the throttle trigger,
slide control and throttle trigger
interlock in that order. This is the
starting throttle position.
1
8
9
: Set the choke lever (8):
For cold start to g
For warm start to e
– also use this position if the engine
has been running but is still cold.
: Press the fuel pump bulb (9) at least
five times – even if the bulb is
already filled with fuel
MM 55, MM 55 C