Function Display; Cleaning And Maintenance; Safety Information - CASO DESIGN EMCG 32 Manual De Instrucciones

4) When the end of the defrosting time has been reached, the system will sound signal
tones.

13.17 Function display

1) If during cooking you press
2) If during cooking you press

14 Cleaning and Maintenance

This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.

14.1 Safety information

Please observe the following safety notices, before you commence with cleaning the
device:
► The oven must be cleaned and food residues must be removed at regular intervals. If
the oven is not maintained in a clean condition, this will have a detrimental effect on
the service life of the device and can also result in a dangerous condition in the device
as well as in the growth of fungus and bacteria.
► Switch the oven off prior to cleaning it and unplug the plug from the wall power outlet.
► The cooking chamber is hot after it is used. There is a danger of burns! Wait until the
device has cooled down.
► Clean the cooking chamber after use as soon as it has cooled down. Extended waiting
unnecessarily complicates cleaning and can make it impossible in extreme cases.
Excessive accumulations of dirt can even damage the device under certain
circumstances.
► If dampness penetrates into the device, this can damage the electronic components.
Please ensure that no liquid can enter the interior of the device through the ventilation
slots.
► Do not use any aggressive or abrasive cleaning agents or solvents.
► Do not scrape off stubborn dirt with hard items.
► Because of the hazards involved in repair or maintenance work for which the radiation
safety cover must be removed, any such work may only be carried out by a skilled and
qualified specialist.
► Do not use harsh abrasive cleaners or sharp metal scrapers to clean the glass of the
door as they can scratch the surface, which may result in shattering of the glass.
caso EMCG 32
the set time is displayed.
Attention
the current power level is displayed.
69