Sound Adjustments; Adjusting The Sound; Turning On/Off The Loudness Function - JVC KD-S620 Manual De Instrucciones

SOUND ADJUSTMENTS

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
(bass) (treble)
Indication To do:
BAS Adjust the bass.
(Bass)
TRE Adjust the treble.
(Treble)
FAD Adjust the front
(Fader)* and rear speaker
balance.
BAL Adjust the left
(Balance) and right speaker
balance.
level.
VOL Adjust the volume.
(Volume)
* If you are using a two-speaker system, set the fader
level to "00."
14
Each time you press the
button, the adjustable
items change as follows:
(fader) (balance) (volume)
Range
–06 (min.)
|
+06 (max.)
–06 (min.)
|
+06 (max.)
R06 (Rear only)
|
F06 (Front only)
L06 (Left only)
|
R06 (Right only)
00 (min.)
|
50 (max.)
2
Adjust the level
Equalization pattern changes as you
adjust the bass or treble.
Note:
Normally the + and – buttons works as the volume
control. So you do not have to select "VOL" to adjust
the volume level.
Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies
to produce well-balanced sound at low volume level.
Each time you press LOUD, the loudness function
turns on and off alternatively.
LOUD
To increase the level.
To decrease the level.