Turning on/off the super bass
function
The super bass function allows you to maintain the
richness and fullness of the bass sound regardless
of how low you set the volume.
Each time you press S.BASS, the function turns
on and off alternately.
S.BASS
Selecting preset sound modes
You can select a preset sound adjustment suitable
to the music genre.
Each time you press SCM, the sound mode
changes as follows:
Indication
For
SCM OFF (Flat sound)
BEAT
Rock or disco music
SOFT
Quiet background music +1
POP
Light music
Notes:
• You can adjust the preset sound mode to your
preference, and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments" on
page 12.
• To adjust the bass and treble reinforcement
levels or to turn on/off the super bass function,
see page 11.
• When one of the sound modes is selected, it is shown
on the display as follows:
For example, when "POP" is selected.
All manuals and user guides at all-guides.com
SOUND ADJUSTMENTS
(BEAT)
(SOFT)
(POP)
Preset values
BAS TRE S.BASS
00
00
OFF
+2
00
ON
–3
OFF
+4
+1
OFF
Adjusting the sound
You can adjust the sound characteristics to
your preference.
1
Select the item you want to adjust.
Each time you press the
SEL
button, the adjustable items
change as follows:
(Bass)
(Treble)
Indication
To do
BAS
Adjust the bass
(Bass)
TRE
Adjust the treble
(Treble)
FAD*
Adjust the front
(Fader)*
and rear speaker
balance
BAL
Adjust the left
(Balance)
and right speaker
balance
VOL
Adjust the volume
(Volume)
Note:
* If you are using a two-speaker system, set the fader
level to "00".
2
Adjust the level.
To increase the level
To decrease the level
Note:
Normally the + and – buttons work as the volume
control buttons. So you do not have to select
"VOL" to adjust the volume level.
(Fader)
(Balance)
(Volume)
Range
–6 (min.)
|
+6 (max.)
–6 (min.)
|
+6 (max.)
R6 (Rear only)
|
F6 (Front only)
L6 (Left only)
|
R6 (Right only)
00 (min.)
|
50 (max.)
11