General Information; Ordering Replacement Parts - Pentair BERKELEY Manual Del Usuario

Pump Nomenclature • General Information

ORDERING REPLACEMENT PARTS:

Locate the Berkeley nameplate on the pump; plate is
normally on the motor bracket. Information found on this
plate is shown below. To be sure of receiving correct
parts, provide all nameplate data when ordering. The
BM (Bill of Material) number is most important. Write
your nameplate information on the blank nameplate
below for future reference as nameplates can become
worn or lost.
SAMPLE ONLY
Modelo/Model
Dia del impulsor/Impeller Dia.
Record nameplate data here.
Illustrations on the following page show typical
components used in the assembly of motor drive
centrifugal pumps. Both mechanical seal and packing
styles are shown. Refer to these drawings when
ordering any replacement parts.
Serie/S.N.
Fecha/Date
6808 0413
21