Lace Work; Multiple Zigzag Stitch; Seam Finishing; Mending - Sears Kenmore 385.16528000 Manual De Instrucciones

Tabla de contenido

Publicidad

Lace
Work
Stitch selector:
9
(_ Stitch width:
2 to 3
® Stitch length:
1
(_ Needle thread tension:
1 to 4
Presser foot A:
Zigzag foot
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more elegant
when trimmed with lace.
Fold the raw edge of the fabric at least 5/8" (1.5 cm). Place
lace underneath and topstitch with blind hem stitch. Trim
excess fabric close to stitching.
S
S
®
WIDTH
[_1_
LENGTH
(_
®
Multiple
Zigzag
Stitch
_1_ Stitch selector:
4
Stitch width:
5 to 6.5
® Stitch length:
0.5 to 1
(_ Needle thread tension:
2 to 6
Presser foot A:
Zigzag foot
f
®
WIDTH
[_LENGTH
®
®
J
Seam
Finishing
This stitch is used to finish the seam allowance on
synthetics and other fabrics that tend to pucker. The stitch
is also excellent for darning and mending tears.
Place your fabric to allow a 5/8" (1.5 cm) seam.
NOTE:
1
Be careful not to Cut the stitchesl
Mending
Position the tear under the needle so that the stitch
catches both sides.
7
s.
i
J
J
J
58

Publicidad

Tabla de contenido
loading

Tabla de contenido