Bar Tacking; Embroidery - Sears Kenmore 385.16528000 Manual De Instrucciones

Tabla de contenido

Publicidad

BarTacking
(_ Stitch selector:
5
(_ Stitch width:
2 to 6.5
(_ Stitch length:
0.5 to 1
Needle thread tension:
2 to 6
Presser foot A:
Zigzag foot
This is similar to a very short satin stitch and is used to
reinforce points of strain such as corners, pockets and
straps of lingerie.
Sew four (4) to six (6) stitches.
Embroidery
_1_ Stitch selector:
5
(_ Stitch width:
1 to 6.5
Stitch length:
Any
(_ Needle thread tension:
2 to 6
_) Feed dogs:
Dropped
Presser foot:
Remove
Drop the feed dogs and remove the foot holder. Adjust
stitch width as desired. Draw a design onto the fabric with
tailor's chalk. Stretch the fabric between embroidery hoops
and place under the needle.
Lower the presser foot lifter to engage the needle thread
tension. Holding the needle thread in your left hand, rotate
the handwheet counterclockwise
for one complete turn.
Pull the needle thread to draw the bobbin thread to the right
side of the fabric. At medium speed, stitch along the
marked outline, guiding the fabric carefully by hand. After
embroidery is completed, raise the feed dogs for normal
sewing.
S
f
WIDTH
[_1_
LENGTH
(_
®
®
WIDTH
[_1_
LENGTH
(_
®
®
J
J
J
52

Publicidad

Tabla de contenido
loading

Tabla de contenido