Safety Consciousness On The Job; Safety Precautions For The Operator; Improper Use - Wilo Stratos Serie Instrucciones De Instalación Y Funcionamiento

2.4 Safety consciousness on the job

The safety instructions included in these installation and operating instructions,
the existing national regulations for accident prevention together with any
internal working, operating and safety regulations of the operator are to be com-
plied with.

2.5 Safety precautions for the operator

This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• If hot or cold components on the product/the unit lead to hazards, local mea-
sures must be taken to guard them against touching.
• Leakage (i.e. from a shaft seal) of hazardous (i.e. explosive, toxic or hot) fluids
must be discharged so that no danger to persons or to the environment arises.
National, local and municipal statutory provisions are to be complied with.
• Highly flammable materials are always to be kept at a safe distance from the
product.
• Danger from electrical current must be eliminated. National Electrical Codes,
local codes and regulations must be followed.
2.6 Safety precautions for inspection and installation
The operator must ensure that all inspection and installation work is carried out
by authorized and qualified specialists who have carefully reviewed these
instructions.
Work on the pump/unit must be carried out only with the pump disconnected
(locked out) from the electrical supply and at complete standstill. It is manda-
tory that the procedure described in the installation and operating instructions
for shutting down the product/unit be complied with.
Immediately on conclusion of the work, all safety and protective devices must
be put back in position and/or recommissioned.
2.7 Unauthorized alterations and manufacture of spare parts
Unauthorized modification and manufacture of spare parts will impair the safety
of the product/personnel and will make void the manufacturer's declarations
regarding safety.
Alterations to the product may only be carried out with the manufacturer's
consent. The use of original spare parts and accessories authorized by the
manufacturer will ensure safety. The use of any other parts may invalidate
claims involving the liability of the manufacturer for any consequences.

2.8 Improper use

The operational safety of the supplied product can only be guaranteed if it is
used in accordance with paragraph 4 of the operating instructions. The limits
given in the catalogue or data sheet must under no circumstances be exceeded.
Installation and operating instructions Wilo-Stratos/-D/-Z
English
5