Setting Up An Irrigation Schedule - Irritrol Rain Dial-R Serie Guía Rápida

Controller Station Test Feature
Run a Station Test to check proper valve operation. The test cycle enables all valve stations
to operate in sequence, from 1–10 minutes.
1. Set Function switch to
Run.
2. Turn Dial to Skip Days.
3. Push MANUAL button
once.
4. Adjust run time.
A 2-minute test run is
set by default.

Setting Up an Irrigation Schedule

Setting the Current Time and Day
Function switch to Set
1.
Programs.
2. Turn Dial to Current
Time.
3. Set current time.
Pay attention to "AM"
and "PM".
Turn Dial to Today.
4.
*Note: If Odd/Even schedule or Monthly Water Budget is used,
the current day of the week is preset and cannot be changed.
8
5. Push Semi-Auto to
start watering cycle
(station 1).
6. Turn Dial to
Current Time.
7. Display shows current
time and what station is
running.
8. Manual advances the
station sequence.
5. Select the correct day*.
Display shows
day abbreviation.
6. Return Dial to Current
Time.
7. Function switch back
to Run.