Program Review; Installation Procedures; Selecting An Installation Site - Irritrol IBOC Plus Guía De Usuario

PROGRAM REVIEW

This controller feature enables the various operational settings and status
conditions of each program to be easily reviewed. Within the review
sequence, the following program settings are displayed: Master Valve
On/Off, Rain Sensor On/Off, Watering Days, Start Time(s) and Water
Budget percent factor.
Note: Program changes cannot be made while in the review mode.
To review a program, use the following procedure:
1. Turn the function dial to the
2. Select the program to be reviewed by pressing the
, or
A B C
3. Press the
Press and hold the button to automatically advance through the
displays, briefly pausing at each program element.
4. Repeat steps 2 and 3 to review remaining programs.
5. When finished, return the function dial to

INSTALLATION PROCEDURES

This section includes instructions for mounting the controller cabinet
and making the necessary wiring connections. To ensure safe
operation, it is important to follow the instructions carefully.

SELECTING AN INSTALLATION SITE

Selecting the proper installation site for the controller is essential to
safe and reliable operation. The IBOC Plus features a weather-resistant
cabinet enabling outdoor installation.
The controller should be installed on a vertical wall or other sturdy
structure with the display at approximately eye level. An optional
pedestal mount, model # P2B is available for stand-alone installation.
It is important to select a location that shades the controller during
the hottest hours of the day and provides as much protection from
rain, wind and snow as possible. Never install the controller where it
will be exposed to direct spray from the sprinklers.
Note: When mounting the IBOC Plus controller with a SPC-2 Solar
Power Convertor, it is important to select a location that provides
maximum protection from rain, snow and direct irrigation spray while
providing the SPC-2 exposure to sunlight for a minimum of two hours
per day.
Installation procedures
16
PROGRAM REVIEW
.
button to step through the various review displays.
NEXT
position.
button
PROGRAM
.
AUTO RUN