Fender B-DEC 30 Instrucciones De Funcionamiento página 9

Amp Mode
Use Amp Mode to select an amplifier type (first menu), then modify that amplifier's settings in menus 2–8.
 M enu AmpMenuItems

1 AMP TYPE
2 GAIN
3 AMP VOLUME
4 MID FREQUENCY
5 CONTOUR
6 COMPRESSOR
7 TIMBRE
8 NOISE GATE
FX/Reverb Mode
Use FX/Reverb Mode to select an effect type (first menu), then modify that effect's settings in menus 2–6.
 EffectType
 Menu1
 NONE
OVERDRIVE
FUZZ
SINE CHORUS
TRIANGLE CHORUS
SINE FLANGE
TRIANGLE FLANGE
PHASER
TOUCH WAH
FIXED WAH
ENVELOPE CONTROLLED FILTER
AUTOSWELL
MONO DELAY
OVERDRIVE DELAY
FUZZ DELAY
CHORUS DELAY
FLANGE DELAY
PHASE DELAY
TOUCH WAH FUZZ
Use FX/Reverb Mode to select a reverb type (menu 7), and adjust reverb level (menu 8).
 ReverbType ReverbLevel
 Menu Menu8

NONE ------
AMBIENT 1-10
SMALL ROOM 1-10
LARGE HALL 1-10
B-DEC 3O
Settings—(Function)
Modern FBA, Dirty FBA, Bassman, Bman Grind, LA Session, Rockin Peg, 80's Tone, Brit Grit, Upright
1-10 — (Adjusts amplifier distortion level.)
1-10 — (Adjusts the volume of the current amplifier relative to other presets.)
200–2kHz — (if AMP TYPE is Modern FBA, or Dirty FBA), 150–4kHz — (if AMP TYPE is Rockin Peg), 200–800Hz — (if AMP TYPE is LA
Session), 275–1kHz — (if AMP TYPE is 80's Tone), N/A - (if AMP TYPE is Bassman, Bman Grind, Brit Grit, or Upright.)
1-10 — (Adjusts level of Mid-frequency cut, see diagram A. Adjusts low pass filter if AMP TYPE is Bassman, Bman Grind, Brit Grit, or
Upright, see diagram B), N/A- (if the AMP TYPE is Rockin Peg.)
A
Off, Low, Medium, High, — (Moderates volume range and provides sustain.)
None, Bass Boost, Bright, Punch, Scoop, Mid Bump — (Tone filters.)
Off, Low, Medium, High, — (Cuts low volume noise.)
EffectSettings(for the Effect selected inMenu1)
Menu2 Menu
— —
Level Gain
Level Gain
Level Rate
Level Rate
Level Rate
Level Rate
Level Rate
Level Response
Level Frequency
Level Mode
Level Attack
Level Delay Time
Level Gain
Level Gain
Level Rate
Level Rate
Level Rate
Level Gain
f e n d e r . c o m
B
Menu4 Menu
— —
Low Tone Mid Tone
Octave Level Low Tone
Depth Reverse Delay
Depth Average Delay
Depth Feedback
Depth Feedback
Depth Feedback
Minimum Frequency Maximum Frequency
Minimum Frequency Maximum Frequency
Filter Type Q
Depth Response
Feedback Brightness
Delay Level Delay Time
Delay Level Delay Time
Depth Delay Time
Depth Delay Time
Depth Delay Time
Response Octave Mix

Menu6
—
High Tone
High Tone
Band Split
Band Split
Band Split
Band Split
Band Split
Voice Type
Voice Type
Threshold
Rate
Input Level
Feedback
Feedback
Feedback
Feedback
Feedback
Voice Type