Maxicom -Specific Troubleshooting - Rain Bird ESP-MC Serie Manual De Operación

Troubleshooting,
The actual watering time is different from the time programmed.
Problem
The Water Budget feature is active. Check the Water Budget for the program containing the station(s)
exhibiting the problem.
The display is blank, partial or displays something which is not readable.
Problem
A surge caused the display to scramble. Turn off the main power to the controller, remove the
Solution
rechargeable battery and let the controller sit for about five minutes. Reconnect the power and reattach
the rechargeable battery. If there has been no permanent damage, the controller will operate normally.
2
Maxicom -specific Troubleshooting
The controller is not operating under Maxicom
Problem
Try one of the following solutions:
Solution
• Check the MAXICOM...STAND ALONE switch on the back of the controller front panel. It should
be in the MAXICOM position.
• Contact the Rain Bird Technical Service Hotline for assistance.
The controller does not water, but the Maxicom
Problem
The SENSOR switch is in the incorrect position. Move the SENSOR switch to OFF.
Solution
A Maxicom 2 feature appears to operate correctly at the computer, but will not function when it is
Problem
sent to the controller.
Verify that the channel assignment on the controller matches the CCU channel assignment. The
Solution
controller has a maximum of 28 channel assignments, depending on the type of CCU the controller
is connected to. ESP-SITE-Satellite controllers must be set to channel 1.
30
continued
2 control.
2 system reports normal operation.