Options for switching off the eBike system:
– Press the On/Off button 5 of the on-board computer for at
least 1 second.
– Switch the eBike battery pack off by its On/Off button (see
battery pack operating instructions).
– Remove the on-board computer out of its holder.
If no power is drawn from the drive for about 10 minutes (e.g.
because the eBike is not moving) or no button is pressed on
the Nyon, the eBike system will shut down automatically to
save energy.
The "Nyon" operating system
The Nyon operating system consists of three components:
– the Nyon on-board computer with operating unit
– the smartphone application "Bosch eBike Connect"
– the online portal "www.eBike-Connect.com"
Many configurations and features can be managed and used
on all components. Some configurations and features can be
accessed or operated only via certain components. The syn-
chronization of data occurs automatically during Blue-
tooth®-/internet connection. The following table provides an
overview of the available features.
GSM,
3/4G
Log in/registration
Change of configurations
Recording of journey data
Real-time display of journey data
Processing/analysis of journey data
Creating user-defined displays
Displays the current location*
Navigation
Route planning
Display of remaining distance (circle around
the current location)
Training effect in real-time
Overview of journeys
Statistics "Dashboard"
Purchase of "premium features"
*GPS required
Bosch eBike Systems
www
Premium features
The standard features of the "Nyon" operating system can be
expanded via the AppStore for Apple iPhones and Google
Play Store for Android devices through the purchase of "pre-
mium features".
In addition to the free application "Bosch eBike Connect"
there are several fee-based premium features. A detailed list
of available additional applications can be found in the online
manual under "www.Bosch-eBike.com/nyon-manual".
Initial Operation of the On-board Computer
The battery pack is supplied partially charged. Before the first
use, the Nyon battery pack must be fully charged via the USB
port (see "Energy supply of the on-board computer", page
English–8) or the eBike system.
In order to use all the features of the operating system, you
must also register online.
Registration at the On-board Computer
– Switch on the on-board computer using the On/Off button 5.
– Use the joystick 1 to select your preferred language (select
by pressing the joystick) and follow the instructions.
You have the following options to put Nyon into operation:
– "TEST RIDE"
You can perform a test ride without having to register in ad-
vance or to enter data. After shutting down, all trip data will
be deleted.
– "SET UP">"OFFLINE"
This is a very short registration process limited to Nyon.
Offline means in this case that your journey and user data
are only saved locally on the on-board computer.
Follow the instructions and choose one of the suggested
answers. Entered data is kept after shutting Nyon down,
but will not be synced to the online portal or smartphone
application.
– "SET UP">"ONLINE">"PHONE"
This is a complete registration process. Insert Nyon in the
holder 4, download the application
"Bosch eBike Connect" to your smartphone and register
using the application. Following registration, the journey
data are stored and synchronized with the smartphone ap-
plication and the online portal.
– "SET UP">"ONLINE">"WI-FI"
This is a complete registration process. Connect Nyon via
USB to a power supply (e.g. computer) and ensure you are
in a WLAN network access area. Nyon then connects to the
WLAN network of your choice and you will be directed to
the online portal "www.eBike-Connect.com" where you
can carry out the registration. Following registration, the
journey data are stored and synchronized with the online
portal. A connection to your smartphone can then be cre-
ated from your Nyon ("Settings">"Connections"> "Con-
nect New Smartphone").
English–4
0 276 001 SPN | (3.7.15)