Descargar Imprimir esta página

Mounting/Removing The Mecablitz - Metz MECABLITZ 34 CS-2 Instrucciones Del Manejo

Ocultar thumbs Ver también para MECABLITZ 34 CS-2:

Publicidad

64
Preparations
When loading the batteries ensure that their + and
- poles are aligned with the symbols. Transposed
Preparazione
poles can destroy the flash unit! Always exchange
Preparación
both batteries, replacing them with identical bat-
teries of the same capacity from the same manu-
facturer! Do not dispose of spent batteries in the
domestic waste bin. Spent batteries should be
handed in to an appropriate collecting point.

Mounting/Removing the mecablitz

Mounting:
• Turn off the mecablitz by its main switch .
• Turn the clamping disk
the flash unit.
• Slide the mecablitz foot
accessory shoe.
• Turn the clamping disk
ra body, thereby clamping the flash unit.
Removing:
• Turn off the flash unit before removing it.
upward against the housing of
completely into the camera's
right down against the came-

Publicidad

Capítulos

loading