Exposure Verification - Metz MECABLITZ 34 CS-2 Instrucciones Del Manejo

Indicazione di corretta esposizione
Indicación de control de exposición
☛
82

Exposure verification

Fig. 6
Fig. 6
Fig. 6
The exposure o.k. indicator
ture will be, or was, correctly exposed in the auto mode.
Trigger a test flash with the manual firing button
If the exposure o.k. indicator
flash was fired, then set the next smaller f-number or dimi-
nish the distance to the reflection surface or subject, and
repeat the test flash.
The f-stop established in this manner must also be set on
the camera.
To trigger a test flash, hold the camera and the
flashgun in the same manner as for the actual
shot.
lights up only when the pic-
(fig. 8).
remains dark after the test