König Electronic HAV-MCS54 Manual De Uso página 10

1.2 If your PC is not a member of any
Domain or Workgroup then one must
be joined. To do so, click on the
Change button on the Computer
Name tab and enter the name of the
domain (default on Windows XP is
MSHOME).
1.3 A restart of the PC may be necessary
if the Domain or Workgroup has been
changed.
2. Setup a new user account
• The unit requires a user account to
be set up on each PC that you wish
to browse. By default most PC's have
at least one user account associated
with it. The username and password
(optional) needs to be the same on
each PC as the unit can only store
one username and password. For
Windows XP this can be set up as
described below:
2.1 From the Start menu, select Control
Panel > User accounts.
2.2 Click Create a New Account and
then enter the new username and
the Domain/Workgroup setting as
mentioned in step 1. Select the type
of user(restricted) and then click
Finish.
2.3 Select the user you just created,
select create a new password.
2.4 Note the username and password
• Note for Windows Vista Users:
you have to turn on Guest account
via Manage User Account in the
Control Panel. Then add access to
either "Everyone" or "Guest" on the
shared drive. You can also create a
new account for sharing with the unit.
with a password, if you are concerned
about security. The Guest account
has no password by default and the
unit will connect to it from its factory
default settings.
3. Configure a shared folder
3.1 From the Start menu, select My
Computer and navigate to the folder
you wish to share.
3.2 Right click on the folder and select
Sharing and Security.
10