König Electronic HAV-MCS54 Manual De Uso página 12

Ocultar thumbs Ver también para HAV-MCS54:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 142
4.6 Press  or  to select User Name
or Password and then press OK or
SELECT Enter the username and
password in the corresponding menu.
Refer to page 5 for more information
on inputting characters.
The PC is now ready to stream music
to the unit.
Refer to Media Player on page 18-19
for more information on streaming
music from your PC in this unit
Using shared media (UPnP)
To setup media sharing via Windows
Media Player (WMP):
Media sharing uses Windows Media
Player (WMP) 11 and above as media
server. If you use this method you don't
have to set anything in your radio, but you
do have to permit acces to your PC. You'll
only have to this once, please follow the
steps described below.
1.
Make sure your PC is on the same
network (wired or wireless) that will
be used to share music with the unit.
2.
Press STANDBY to turn on the unit.
3.
Launch Windows Media Player on
your PC and add media to the library.
(Library > Add to Library)
4.
In the WMP main window, click on
Library, then Media Sharing. The
following screen appears:
5.
The unit is shown as an "unknown"
device Select this "unknown device"
and then click Allow and then OK
The PC is now ready to stream music
to the unit
Refer to Media Player on page 18-19
for more information on streaming
music from your PC on this unit.
Clock, alarm, timer and sleep function
Clock
To set the time and date manually:
1.
Press CLOCK on the remote control
Set hour will show in the display.
2.
Press  or  to set the hour,
then press OK or SELECT
3.
Press  or  to set the minute,
then OK or SELECT
4.
Press  or  to set the day,
then press OK or SELECT
5.
Press  or  to change between
12 or 24 hour clock, then press OK or
SELECT
Time and day are now set.
Alarm
The unit includes an alarm function. Make
sure you have correctly set the clock time
to use the alarm function.
To activate the alarm:
1.
Press ALARM on the remote control.
Enable or Disable will show in the
display
12

Publicidad

Tabla de contenido
loading

Tabla de contenido