König Electronic HAV-MCS54 Manual De Uso página 3

Connect the Ethernet cable
Use an Ethernet cable if you don't have a WiFi access point. If you already have a
WiFi access point, no connection is required as this unit is equipped with a built-in
WiFi network card.
Connect the power
This system is designed to operate on 230 V 50 Hz AC. Connecting this unit to
any other voltage could result in damage to the unit which is not covered by your
warranty.
2) Basic system setup
AUX
You can connect an auxiliary audio device to this system to play audio from other
devices over the speakers of this system. Use the AUX input connection for this
purpose.
Battery installation
Insert two AAA batteries into the remote control and make sure you insert them
according to the indicated polarity.
Power ON the Main Unit
Press the STANDBY button and the device will turn on. The unit will now stay in
standby mode.
3