8.
If your network is password protected,
please input the password. If you
input the correct password the radio
will connect to the internet.
To connect to the Internet manually:
1.
Press STANDBY to turn on the unit.
2.
Press FUNCTION on the main unit
or iRadio, FM or M. Player on the
remote remote control
•
Do not select CD, SD/MMC, iPod
AUX mode
3.
Press MENU and then press or
to select Main menu and then press
OK or SELECT.
4.
Press or to select System Setup
and then press OK or SELECT.
5.
Press or to select Internet Setup
and then press OK or SELECT.
6.
Press or to select Manual Setting
and then press OK or SELECT.
7.
Depending
on
settings, press or to select Wired
or Wireless and then press OK or
SELECT.
8.
•
®
or
•
9.
10. Press or to select OPEN, WEP,
your
connection
8
Press or to select DHCP enable
or DHCP disable and then press OK
or SELECT.
DHCP (Dynamic Host Configuration
Protocol) helps you obtaining various
parameters necessary for the client
to operate in an Internet Protocol (IP)
network with minimum or no manual
configurations
Check
service provider if your network is
equipped with such device
If you have selected Wired in step 7,
you will be connected to the Internet
Enter your network name (SSID), refer
to instructions on page 5 for more
information on inputting characters.
WPA or WPA2 according to your
security settings and then press OK
or SELECT.
with
your